{"product_id":"korg-ds-dac-10r-1-bit-usb-dac-adc-with-phono-input-and-dsd-recording","title":"KORG DS-DAC-10R 1-Bit USB DAC\/ADC with Phono Input and DSD Recording","description":"\u003ch2\u003eAll products for sale are Japan domestic models.\u003c\/h2\u003e\n\u003ch2\u003eInternational Shipping directly from Japan.\u003c\/h2\u003e\n\u003cp\u003eProduct package and manual will be in Japanese language.\u003c\/p\u003e\n\u003cp\u003eSpecification is the same as what is sold in Japan. Be sure to check if the same spec works in your environment.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eKORG DS-DAC-10R\u003c\/strong\u003e is a 1-bit USB DAC that plays DSD and PCM files natively through its RCA line outputs and a front-panel 6.3mm headphone jack. It is also a recording interface: connect a turntable to the built-in phono input, or a line-level source such as a cassette deck to the line input, and record to your computer in DSD (5.6MHz or 2.8MHz) or PCM (up to 192kHz\/24-bit).\u003c\/p\u003e\n\u003ch3\u003eNative DSD and PCM Playback\u003c\/h3\u003e\n\u003cp\u003eDSD files play natively at 2.8224MHz and 5.6448MHz, and PCM plays at 44.1kHz to 192kHz (16\/24-bit). The DA converter is a Cirrus Logic CS4398. The unit is rated at 105dB S\/N ratio (typical, 20Hz to 20kHz, IHF-A) and 0.005% THD+N (typical, 20Hz to 20kHz).\u003c\/p\u003e\n\u003ch3\u003eHeadphone and Line Outputs\u003c\/h3\u003e\n\u003cp\u003eThe front-panel 6.3mm stereo headphone jack delivers up to 70mW + 70mW into 32 ohms and accepts loads of 16 ohms or more. A pair of RCA unbalanced line outputs connects the unit to an amplifier or powered speakers.\u003c\/p\u003e\n\u003ch3\u003eRecord Vinyl and Line Sources in DSD\u003c\/h3\u003e\n\u003cp\u003eThe phono input accepts a turntable directly and has a ground terminal. The line input takes line-level sources such as cassette decks. Recording is handled on your computer with KORG's AudioGate 4 software, which also controls the input selection (switched by relays inside the unit).\u003c\/p\u003e\n\u003cp\u003eThe AD converter is a Texas Instruments PCM4202, the same chip used in KORG's MR-2000S recorder. The phono preamp uses a Texas Instruments OPA1662.\u003c\/p\u003e\n\u003ch3\u003eDSD Phono Equalizer\u003c\/h3\u003e\n\u003cp\u003eA phono equalizer is built into AudioGate 4. It supports the RIAA curve plus five other playback curves, and the equalization can be applied at the time of recording or after recording.\u003c\/p\u003e\n\u003ch3\u003eBuild and Operation\u003c\/h3\u003e\n\u003cp\u003eThe die-cast body keeps the front panel minimal, with only a headphone jack and a volume knob. An LED ring on the volume knob shows the sample rate and the recording status. The unit is powered over USB (5V, 500mA), so no AC adapter is needed.\u003c\/p\u003e\n\u003cp\u003eWith the iAudioGate app, an Apple connection kit and a powered USB hub, it can also be used with an iPhone. The iAudioGate app does not include the phono equalizer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cp\u003eModel: DS-DAC-10R\u003c\/p\u003e\n\u003cp\u003eType: 1-bit USB DAC \/ ADC, 2 channels\u003c\/p\u003e\n\u003cp\u003eUSB Input (playback): DSD 2.8224MHz \/ 5.6448MHz (1-bit), PCM 44.1kHz to 192kHz (16\/24-bit)\u003c\/p\u003e\n\u003cp\u003eRecording: DSD 2.8MHz \/ 5.6MHz, PCM up to 192kHz\/24-bit\u003c\/p\u003e\n\u003cp\u003eInterface: USB 2.0 High Speed, Type B (ASIO 2.1, WDM, Core Audio)\u003c\/p\u003e\n\u003cp\u003eDA Converter: Cirrus Logic CS4398\u003c\/p\u003e\n\u003cp\u003eAD Converter: Texas Instruments PCM4202\u003c\/p\u003e\n\u003cp\u003ePhono Preamp: Texas Instruments OPA1662\u003c\/p\u003e\n\u003cp\u003eFrequency Response: 10Hz to 20kHz +\/-1dB (44.1kHz \/ 48kHz), 10Hz to 40kHz +\/-1dB\u003c\/p\u003e\n\u003cp\u003eS\/N Ratio: 105dB (typical, 20Hz to 20kHz, IHF-A)\u003c\/p\u003e\n\u003cp\u003eTHD+N: 0.005% (typical, 20Hz to 20kHz)\u003c\/p\u003e\n\u003cp\u003eLINE OUT L\/R: RCA, unbalanced, load impedance 10k ohms or more\u003c\/p\u003e\n\u003cp\u003eLINE IN L\/R: RCA, input impedance 47k ohms\u003c\/p\u003e\n\u003cp\u003ePHONO L\/R: RCA, input impedance 50k ohms, nominal 5mVrms\u003c\/p\u003e\n\u003cp\u003ePHONES: 6.3mm stereo jack, load impedance 16 ohms or more, maximum output 70mW + 70mW (32 ohms)\u003c\/p\u003e\n\u003cp\u003ePower: USB bus power (5V, 500mA), maximum 2.5W\u003c\/p\u003e\n\u003cp\u003eDimensions: 155 x 184 x 49mm (including protrusions)\u003c\/p\u003e\n\u003cp\u003eWeight: Approx. 1.1kg\u003c\/p\u003e\n\u003cp\u003eIncluded: USB cable\u003c\/p\u003e\n\u003cp\u003eJapan domestic model\u003c\/p\u003e","brand":"KORG","offers":[{"title":"Default Title","offer_id":67846214090845,"sku":"KORG-DS-DAC-10R","price":37125.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/2830\/3965\/files\/61ZkFDny36L._AC_SL1500.jpg?v=1793067402","url":"https:\/\/handdripaudio.com\/products\/korg-ds-dac-10r-1-bit-usb-dac-adc-with-phono-input-and-dsd-recording","provider":"Hand Drip Audio, Japan","version":"1.0","type":"link"}